Connecting Power to 1U Chassis 87L00032BAA-A

Connect the -48V DC power to the 1U chassis using cable 51305285. The connector on the 1U chassis is located on the rear side of the chassis.

The 1U chassis can be fed also with mains power 100-240VAC. This connector is also located on the rear side.

Note:

If more that 4 pcs of 1U chassis and/or 3U chassis are feed with -48V in one system, the power ports in the Power unit are not enough (4 ports). Then a splitter cable can be used to feed 2pcs of 1U/3U chassis per power port. This splitter cable is 50006936.

Note:

only 2 chassis can be feed from one port in the Power Unit.

Parent topic: Connecting Internal Power Cables
↑