Line Lengths

ELU26

The following three connection alternatives are based on the usage of a 75 ohm twisted pair cable, 120 nF/km and wire 0.6 mm or a 150 ohm twisted pair cable, 30 nF/km and wire 0.6 mm or 125 ohm/km DC.

• 1000 m, point-to-point with one terminal.
• 500 m, extended passive bus with 8 terminals.
• 100 m, short passive bus with 8 terminals.

ELU31

For information see Installation Instructions for CORDLESS PHONES.

ELU33

600 m if using a twisted pair cable with wire diameter 0.4 mm.

1000 m if using a twisted pair cable with wire diameter 0.5 mm, point-to-point with one terminal.

From ELU34/1 to ELU34/6

6000 m if using a twisted pair cable with wire diameter 0.4 mm.

9000 m if using a twisted pair cable with wire diameter 0.5 mm.

ELU34/7

x000 m if using an Ethernet CAT5 twisted pair cable with a wire diameter of approximately 0.5 mm.

x000 m if using an Ethernet CAT6 twisted pair cable with a wire diameter of approximately 0.5 mm.

x000 m if using an Ethernet CAT7 twisted pair cable with a wire diameter of approximately 0.6 mm.

TLU76

260 m if using a 120 ohm twisted pair cable without repeater.

TLU77

260 m if using a 120 ohm twisted pair cable without repeater.

TLU79

Connecting TLU79 to TLU79 through MDF (8 pairs), see Figure 2.

TLU80

7000 m if using a twisted pair cable with wire diameter 0.4 mm. 11000 m if using a twisted pair cable with wire diameter 0.5 mm.

From TLU83/1 to TLU83/3

5000 m if using a twisted pair cable with wire diameter 0.4 mm.

8000 m if using a twisted pair cable with wire diameter 0.5 mm.

TLU83/4

x000 m if using an Ethernet CAT5 twisted pair cable with a wire diameter of approximately 0.5 mm.

x000 m if using an Ethernet CAT6 twisted pair cable with a wire diameter of approximately 0.5 mm.

x000 m if using an Ethernet CAT7 twisted pair cable with a wire diameter of approximately 0.6 mm.