Post-Installation Configuration

After the successful servers installation, follow the steps in this section to conclude the configuration:
  1. Configure the media gateways. See Configure the Media Gateways for more information.
  2. Some optional features are not loaded by default. See Optional Programs for more information.

    To use one of those features, load the corresponding program unit(s) use the pu_add command. See the description for ADD/REMOVE/CHANGE PROGRAM for more details.

  3. Enter the board_config -scan command from the MX-ONE Service Node mdsh shell, see the command description for BOARD CONFIGURATION. This ensures that all virtual boards on the Media Gateway are registered by the MX-ONE Service Node.
  4. Enter the command alarm from the MX-ONE Service Node mdsh shell, see the command description for ALARM FUNCTIONS. This ensures that there are no serious alarms in the alarm log.
  5. If applicable, check status of SW RAID 1. Logon as root and key command mdadm -D /dev/md0, mdadm -D /dev/md1, and cat /proc/mdstat.
  6. Optional, network redundancy, that is, Bonding

    Run the mxone_maintenance command that starts the Maintenance Utility and select Option Bonding settings in system

  7. Optional, server redundancy

    For details, see Operational directions for SERVER REDUNDANCY.

  8. Execute Installation Test for MX-ONE.

    For details see Operational Directions for Installation Test for MiVoice MX-ONE.

  9. Place a new order on the order desk to receive a permanent license file.

    For more details, see Operation Directions for ADMINISTRATOR USER'S GUIDE

Parent topic: Installation and Initial Configuration
↑