MX-ONE OS Image Installation

To install the MX-ONE OS image, perform the following steps:

OS Install
  1. Boot the machine from the storage media with MX-ONE OS Image.
  2. Enter BIOS mode.
  3. Change the date if necessary. Other parameters might also need to be modified (Set Time Zone).
  4. If USB is used, make sure that the boot order is: Hard disk, USB.
  5. Re-boot the machine from the storage media.
  6. At the initial screen select the “Install” option. Press Enter.
    Note: Beware of the timeout when the first screen appears. In case no selection is made, the system will boot with default parameters and the configuration file will not be read.
  7. Log on as root. (Default password is set to changeme. Change it during the installation.)
  8. The OS is now installed on the server HW.
  9. Repeat for all servers as necessary.

    The operating system has now been installed on all hosts (servers) that are included in the system.

Parent topic: Installation and Initial Configuration
↑