ACS, Fault Codes 257 - 511

259

Faulty FTU board, see the fault locating directions for FAULT CODE 259.

1

260

Fault on line to interworking PBX or public exchange, see the fault locating directions for FAULT CODE 260.

1

ADD INFO 1:

Individual pointer to TRS data individual.

ADD INFO 2:

Description of the type of line fault for external lines.

261

No connection with operator console, see the fault locating directions for FAULT CODE 261.

3

ADD INFO 1:

Individual pointer to OPS data individual.

263

Faulty MF sender or MF receiver, see the fault locating directions for FAULT CODE 263.

2

264

Faulty MF sender, see the fault locating directions for FAULT CODE 264.

2

265

Faulty MF receiver, see the fault locating directions for FAULT CODE 265.

2

267

Multi-Party resource faulty, see the fault locating directions for FAULT CODE 267.

1

268

Digital trunk out of order, AIS signal received, see the fault locating directions for FAULT CODE 268.

4

ADD INFO 1:

Individual pointer to TRS data individual.

269

Digital trunk, loss of frame synchronization, see the fault locating directions for FAULT CODE 269.

4

ADD INFO 1:

Individual pointer to TRS data individual.

270

Digital trunk, bit error in frame synchronization word, see the fault locating directions for FAULT CODE 270.

3

ADD INFO 1:

Individual pointer to TRS data individual.

271

Digital trunk, received alarm from remote end, see the fault locating directions for FAULT CODE 271.

3

ADD INFO 1:

Individual pointer to TRS data individual.

ADD INFO 2:

0

Synchronization error in time slot 0.

1

Multiframe synchronization error in time slot 16.

2

Yellow alarm (ITU-T).

3

Remote multiframe alarm.

272

Digital trunk, loss of multiframe synchronization, see the fault locating directions for FAULT CODE 272.

4

ADD INFO 1:

Individual pointer to TRS data individual.

274

Digital trunk, clock malfunction (slip), see the fault locating directions for FAULT CODE 274.

2

ADD INFO 1:

Individual pointer to TRS data individual.

275

Statistic supervision, too short seizure of trunk, see the fault locating directions for FAULT CODE 275.

1

ADD INFO 1:

Individual pointer to TRS data individual.

276

No connection with paging equipment, see the fault locating directions for FAULT CODE 276.

4

ADD INFO 1:

Paging channel.

277

Supervision value exceeded for paging equipment, see the fault locating directions for FAULT CODE 277.

2

ADD INFO 1:

Paging area.

ADD INFO 2:

Mean waiting time.

ADD INFO 3:

Defined value.

280

Digital trunk, unauthorized charging pulse, see the fault locating directions for FAULT CODE 280.

1

ADD INFO 1:

Individual pointer to TCS data individual.

ADD INFO 2:

Mean waiting time.

281

Quality error in interface to ICS computer, see the fault locating directions for FAULT CODE 281.

2

ADD INFO 1:

Individual pointer.

282

Status error in interface to ICS computer, see the fault locating directions for FAULT CODE 282.

2

ADD INFO 1:

Individual pointer.

283

Congestion value for Keycode Receiver reached, see the fault locating directions for FAULT CODE 283.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

284

Congestion value for Tone Receiver reached, see the fault locating directions for FAULT CODE 284.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

285

Congestion value for CS (MFC) reached, see the fault locating directions for FAULT CODE 285.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

286

Congestion value for CR (MFC) reached, see the fault locating directions for FAULT CODE 286.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

287

Congestion supervision value reached for PCM-Line, see the fault locating directions for FAULT CODE 287.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

288

Congestion value for conference reached, see the fault locating directions for FAULT CODE 288.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

289

Congestion value for common bell reached, see the fault locating directions for FAULT CODE 289.

1

UNIT

The program unit that administers the common bell function.

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

290

Congestion value for route reached, see fault locating directions for FAULT CODE 290.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Route number subjected to congestion monitoring.

ADD INFO 3:

Defined congestion value in 1/100.

292

Traffic recording data dump could not be executed, see the fault locating directions for FAULT CODE 292.

1

ADD INFO 1:

States the reason for the fault.

293

Traffic recording internal memory data erased, memory full, see the fault locating directions for FAULT CODE 293.

Attempt to dump traffic recording data failed and data in internal memory is lost.

1

ADD INFO 1:

States the reason for the fault.

294

Traffic recording internal memory data erased, midnight dump, see the fault locating directions for FAULT CODE 294.

1

ADD INFO 1:

States the reason for the fault.

295

Calendar time activation request denied, see the fault locating directions for FAULT CODE 295.

1

ADD INFO 2:

0

No absolute individual free.

1

No repetition individual free.

2

Incorrect ordering signal.

3

Clock invalid.

4

Request already initiated.

5

The passive calendar clock is being updated.

296

Congestion value for Keycode Sender reached, see the fault locating directions for FAULT CODE 296.

1

ADD INFO 1:

Recorded congestion value in 1/100.

ADD INFO 2:

Internal device record.

ADD INFO 3:

Defined congestion value in 1/100.

297

Loss of power (-60 V), see the fault locating directions for FAULT CODE 297.

1

ADD INFO 1:

Recorded congestion value in 1/100.

298

Character error in the interface to information computer system, see the fault locating directions for FAULT CODE 298.

1

ADD INFO 1:

Individual pointer.

299

Digital trunk, wrong pattern received in idle state, see fault locating directions for FAULT CODE 299.

1

ADD INFO 1:

Pointer to the interface.

300

Digital trunk, seizure acknowledgment not received, see the fault locating directions for FAULT CODE 300.

1

ADD INFO 1:

Pointer to the interface.

301

Digital trunk, wrong bit pattern received after disconnection, see the fault locating directions for FAULT CODE 301.

1

ADD INFO 1:

Pointer to the interface.

302

Digital trunk, wrong bit pattern received in registration state, see the fault locating directions for FAULT CODE 302.

1

ADD INFO 1:

Pointer to the interface.

303

ISDN Data link alarm, see the fault locating directions for FAULT CODE 303.

2

ADD INFO 1:

Pointer to the interface.

ADD INFO 2:

0

0 = G fault, Unsuccessful data link establishment.

1

1 = H fault, No Data Link (DL)-RELEASE acknowledgment.

2

2 = Maximum retransmit count exceeded.

3

J fault, Invalid received sequence number.

4

K fault, Frame reject response.

5

A fault, Unexpected supervisory response

6

B, C, D, E fault, Unexpected Unnumbered acknowledgment (UA) or Disconnected Mode (DM) response.

7

F fault, Set Asynchronous Balanced Mode Extended (SABME) from peer received.

8

Q fault, Blocking received.

9

R fault, Disconnected Mode (DM) response received.

10

I fault, No response on Receiver Ready (RR) or Receiver Not Ready (RNR).

11

O fault, Received information field > N201 (260 Octets).

12

12= L fault, Undefined control field.

13

N fault, Received frame with incorrect length.

14

M fault.

15

P fault, N2X4, Maximum number of retransmissions of RNR frames exceeded

18

TEI removal received.

26

TEI removal received.

305

Blocked trunkline by a manual switch on the board, see the fault locating directions for FAULT CODE 305.

1

ADD INFO 1:

Faulty TRS individual pointer.

306

Incoming call, the line pulses are not in range, see the fault locating directions for FAULT CODE 306.

1

ADD INFO 1:

Faulty TRS individual pointer.

307

Outgoing call, the line pulses are not in range, see the fault locating directions for FAULT CODE 306.

1

ADD INFO 1:

Faulty TRS individual pointer.

308

Analogue trunk, unauthorized charging pulse, see the fault locating directions for FAULT CODE 308.

-

ADD INFO 1:

Individual pointer to TCS data individual.

309

ISDN Data link alarm, bit error in bit stream (CRC-4), see the fault locating directions for fault code 309.

The TLU-board has discovered a bit error in the incoming bit stream (CRC-4).

1

ADD INFO 1:

Pointer to interface

ADD INFO 2:

Bit error rate

0

= > 1 / errored seconds

1

= > 1 * 10EE -3 / severed errored seconds

2

= > 1 * 10EE -6 / degraded minutes

310

ISDN excessive bipolar violation, see fault locating directions for FAULT CODE 310.

1

ADD INFO 1:

Pointer to TLU data individual.

311

ISDN failed signal state, see the fault locating directions for FAULT CODE 311.

3

ADD INFO 1:

Pointer to TLU data individual.

312

ISDN digital trunk, loss of signal, see the fault locating directions for FAULT CODE 312.

3

ADD INFO 1:

Pointer to TLU data individual.

313

ISDN excessive out of frame, see fault locating directions for FAULT CODE 313.

1

ADD INFO 1:

Pointer to TLU data individual.

314

ISDN bit error rate, see the fault locating directions for FAULT CODE 314

2

ADD INFO 1:

Pointer to TLU data individual.

317

ISDN error seconds, see the fault locating directions for FAULT CODE 317.

2

ADD INFO 1:

Pointer to TLU data individual.

319

Static semipermanent connection disturbance, see fault locating directions for FAULT CODE 319.

3

ADD INFO 1:

Specifies the failed connection's record pointer in the program unit SSM.

320

Telephony calls throttled, see the fault locating directions for FAULT CODE 320.

4

ADD INFO 1:

Server processor status.

0

Less than Yellow level of signaling response time delay. No rejection of calls.

1

Level1. Yellow to Red level of signaling response time delay. New internal calls are rejected.

2

Level 2. More than Red level of signaling response time delay. All new calls are rejected.

321

IP address blocked, see the fault locating directions for FAULT CODE 321.

3

324

Faulty TMU board, see fault locating directions for FAULT CODE 324.

2

ADD INFO 1:

Shows faulty function on the TMU board, or if the TMU board has been placed on an invalid board position.

330

No signaling link active within signaling link set, see the fault locating directions for FAULT CODE 330.

3

ADD INFO 1:

States the individual pointer to the TRS data individual, that is, the signaling link set.

ADD INFO 2:

States the signaling link set number.

ADD INFO 3:

States the cause of becoming out of service.

B0 - B3:

0

Reception of consecutive LSSUs.

1

Intolerably high signal unit error rate.

2

Alignment unsuccessful.

3

Excessive delay of acknowledgments.

4

Two out of three unreasonable backward sequence numbers or FIB.

5

Layer 1 failure.

6

Time out T6 (remote congestion).

7

Board activation.

8

Excessive pause between consecutive signal units.

332

Excessive delay of acknowledgment message, see the fault locating directions for FAULT CODE 332.

2

ADD INFO 1:

Shows whether the message is for a board or a trunk individual.

ADD INFO 2:

States the pointer of the board or trunk individual.

ADD INFO 3:

States the code of the sent message.

333

Digital trunk group, excessive number of blocked lines, see the fault locating directions for FAULT CODE 333.

1

ADD INFO 1:

States the blocking group number.

ADD INFO 2:

States the calculated threshold value of blocked lines.

334

Digital transmission system faulty, see the fault locating directions for FAULT CODE 334.

2

ADD INFO 1:

States the pointer of the board individual.

336

Lost data from/to information computer system, see the fault locating directions for FAULT CODE 336.

3

ADD INFO 1:

Individual pointer.

ADD INFO 2:

Shows direction and type of lost data.

0

A message was not sent from the PBX to the information computer system.

1

A network message waiting message was not processed by the PBX due to network congestion.

2

A network waiting message was not processed by the PBX due to RM record congestion.

ADD INFO 2:

Shows information system identity. (Only used for ADD INFO 1 = 1 or 2.)

337

Digital trunk, call setup message received for unassigned circuit, see the fault locating directions for FAULT CODE 337.

1

ADD INFO 1:

States the circuit identification code.

ADD INFO 2:

States the signaling link set number.

339

Quality error in ANCD communication, see the fault locating directions for FAULT CODE 339.

2

ADD INFO 1:

Individual pointer.

ADD INFO 2:

0

Faulty signal length.

1

Faulty checksum.

2

Faulty order.

345

Information Computer, faulty communication channel, see the fault locating directions for FAULT CODE 345.

2

ADD INFO 1:

Individual pointer.

346

Information Computer output buffer overflow, see fault locating directions for FAULT CODE 346.

2

ADD INFO 1:

Individual pointer.

347

Synchronization fault for DECT fixed part, see fault locating directions for FAULT CODE 347.

2

ADD INFO 1:

Pointer to faulty individual.

ADD INFO 2:

Description of the type of fault.

0

Loss of communication on RING I/F.

1

Loss of synchronization on RING I/F.

2

Loss of communication on BUS I/F.

3

Loss of synchronization on BUS I/F.

4

Unplugged RING cable transmitter side.

5

Unplugged RING cable receiver side.

6

Unplugged BUS cable, transmitter or receiver, or both.

12

Faulty operation of Automatic Cable Delay Measurement (ACDM).

348

Synchronization disturbance for DECT fixed part, see the fault locating directions for FAULT CODE 348.

2

ADD INFO 1:

Pointer to disturbance marked individual

ADD INFO 2:

Reload of Delay Compensation Counter Register when Initiating board, no measure.

Manual restart of board, no measure.

Broken or missing cable, or faulty LSU switch.

Synchronization distortion caused by bad or disturbed cable. Very noisy environment requires shielded cables.

Too long synchronization cable or too thin wires.

Other media for DECT synchronization than copper is not approved.

Repeaters in the DECT synchronization ring are not approved.

349

Faulty RFP for DECT fixed part, see fault locating directions for FAULT CODE 349.

2

ADD INFO 1:

Pointer to faulty individual.

ADD INFO 2:

Description of the fault type.

2

RFP initiated but not connected.

4

RFP faulty.

ADD INFO 3:

Faulty Radio Fixed Part Number (RPN).

350

CSTA, faulty communication channel, see the fault locating directions for FAULT CODE 350.

2

ADD INFO 1:

Individual pointer to link group individual.

358

SMS, faulty communication channel, see the fault locating directions for FAULT CODE 358.

2

359

Routing Server, Faulty IP Connection to Satellite, see fault locating directions for FAULT CODE 359.

2

ADD INFO 1:

Description of the fault:

0

First initiated IP connection is faulty.

1

Second initiated IP connection is faulty.

ADD INFO 2:

Digits 1 - 4 in destination code to satellite.

ADD INFO 3:

Digits 5 - 8 in destination code to satellite.

ADD INFO 4:

Digits 9 - 10 in destination code to satellite.

360

Routing Server, PNR table has been split, see fault locating directions for FAULT CODE 360.

2

362

Device board is at alarm level 2, see fault locating directions for FAULT CODE 362.

1

365

Device Fault, see the fault locating directions for FAULT CODE 365.

1

ADD INFO 1: Type of fault

1

Ring lead on ELU34 is grounded.

366

Inconsistency between defined ITYPE and active terminal, see the fault locating directions for FAULT CODE 366.

1

ADD INFO 1:

Directory number, Connected ITYPE.