DIALEDNUMBER

The dialed number is the called party"s number which could be an external number for outgoing calls or an internal number when a call is internal or incoming.

Only the leading digits of the dialed number are recorded depending on the field width of the output format used.

The digits may include any access or destination code as dialed. If this access or destination code is subsequently extracted out of the dialed number string to be displayed separately, then only the remaining digits are displayed in the dialed number field. Any digits that cannot be displayed due to field width limitations are truncated and lost. This field has right adjusted format (Leading blanks are used).

When a Telephony Name Selection is used to place a call, any non-digit character which is programmed will be displayed in the CIL output just as is appears on the Tele- phony Name Selection key.

When dialing in the CDP environment, the complete number including the network destination code, is located in the dialed number field. The network destination code is also located in the Access Code 1 field as is described in the ACCESSCODE1 and ACCESSCODE2.