Initiation of an Emergency Destination
An emergency destination is an external destination associated to the existing public route to the PSTN, which will be used for emergency calls.
In the branch office scenario, the emergency destination will be associated to the existing tie-line to the branch office SBN.
Prerequisites
A public route must already be initiated in the main site to the PSTN. A destination associated to this route for outgoing calls to the PSTN must already be initiated.
In the branch office scenario, a tie-line to the branch office SBN must already be initiated in the main site. A destination associated to this route for local hop-off to the PSTN must already be initiated.
Execution
Step 1. Initiation of the external destination in the number series
Use the number_x commands as described in the operational directions for NUMBER ANALYSIS.
Step 2. Initiation of the emergency external destination
Use the RODDx commands as described in the operational directions for ROUTE DATA.
Set the byte D26 of the ADC parameter to Emergency destination.
Set the other values of the ADC parameter exactly the same as the values in the existing destination to the PSTN.
Example 1
Step 1. Initiation of the external destination in the number series
number_initiate -numbertype ed -number 112
Step 2. Initiation of the emergency external destination
Initiation of an emergency destination associated to the route 38 to the PSTN network for the emergency number 112.
RODDI:DEST=112,ROU=38,SRT=1,ADC=0305000000000050005000010100;