GET /pm-extension-ms/pm-extension/server-details/{subsystemName}

Fetch servers.

To get the servers:

  1. Perform the authentication and login to the API. For more information, see POST /auth/login.

  2. Use GET /pm-extension-ms/pm-extension/server-details/{subsystemName} to send an HTTP GET request.

  3. Click Try it Out option.

  4. Set the parameters as listed in the following table.

    Parameter Name

    Sample Value

    Supported Value

    Description

    extensionNumber

    All

    string

    Indicates the extension number. The LIM IP on which the extension is present. Coma ',' separated values are allowed.

    Note:

    This parameter is mandatory.

    subsystemName

    subsystemName

    string
    Indicates the subsystem name (MiVoice MX-ONE).
    Note:

    This parameter is mandatory.

  5. Click on Execute to generate the request URL.

    Request URL:
    https://<IP_Address>:<PORT>/pm-extension-ms/pm-extension/server-details/1?extensionNumber=All
    The following table lists the expected responses.

    Response Type

    Value

    Schema
    Valid Response

    200 OK

    		 
    {
  "extensionLimVOs": [
    {
      "extension": "string",
      "limnumber": "string"
    }
  ],
  "lim": [
    {
      "limnumber": "string",
      "limaddress": {
        "ipv4": "string",
        "ipv6": "string"
      },
      "limtype": "string",
      "lan0Address": "string",
      "lan1Address": "string"
    }
  ]
}
    Error Response

    400 Bad Request

    Not applicable

    401 Authentication Failure

    Not applicable

    403 Forbidden

    Not applicable

    404 Not found

    Not applicable
Parent topic: Extension
↑