PUT /pm-extension-ms/pm-extension/v1/Analog/FAX

Perform the authentication and login to the API. For more information, see POST /auth/login.

Use PUT /pm-extension-ms/pm-extension/v1/Analog/FAXUpdate to send an HTTP PUT request.

Click Try it Out option.

Set the parameters as listed in the following table.

Parameter Name	Sample Value	Supported Value	Description
subsystemName	subsystemName	string	Indicates the subsystem name (MiVoice MX-ONE). Note: This parameter is mandatory.

Under Request body select application/json from drop-down list.

Enter the request body parameter values as follows:

{
  "extensionNumber": "string",
  "featureLevel": "string",
  "description": "string",
  "commonServiceProfile": 0,
  "customer": "string",
  "equipmentPosition": "string",
  "maximumChargingCost": 0,
  "roworColumninTransmissionMatrix": 0,
  "bossSecretary": false,
  "individualAbbreviatedNumbers": [
    {
      "individualAbbreviatedNumber": 0,
      "translatedNumber": 0,
      "individualAbbreviatedNumberType": "string"
    }
  ],
  "icatParameter": {
    "bearerServicesforOriginatingExtension": 0,
    "globalNoProgressToneforVoiceMail": 0,
    "allowCallerIdentityPresentationonAnalogTelephones": 0,
    "polarityReversal": 0,
    "messageWaitingLamp": 0,
    "allowCallMeteringPulsestobeSenttotheEquipmentConnectedtotheELUBoard": 0,
    "typeofSignalling": 0,
    "typeofStandard": 0,
    "dataTransmissionMode": 0,
    "enableFSKASCIICharacterFilter": 0,
    "enhancedGlobalTone": 0,
    "restrictExtensiontoInitiateInquiry": 0,
    "noProgressIndication": 0,
    "ringingSignal:": 0
  },
  "displayNumber": "string",
  "nameIdentity": {
    "firstName": "string",
    "lastName": "string",
    "includeinDialbyNameDatabase": true,
    "namePresentationOrder": "string",
    "restrictPresentation": true,
    "information": "string"
  },
  "welcomeAnnouncement": "string",
  "continuousAnnouncement": "string",
  "authorizationCodes": [
    {
      "authorizationCode": "string",
      "hashType": "string",
      "callLoggingCode": "string",
      "customer": "string",
      "newCustomer": "string",
      "commonServiceProfile": "string",
      "restrictUsageToThisExtensionOnly": true
    }
  ],
  "ringSignals": [
    {
      "callingNumber": "string",
      "routeNumber": "string",
      "ringType": "string",
      "customer": "string"
    }
  ],
  "parallelRinging": {
    "mdir": "string",
    "secondaryDirectoryNumber1": "string",
    "secondaryDirectoryNumber2": "string",
    "delaySeizure": "string"
  },
  "huntGroup": {
    "huntGroupNumber": "string",
    "groupAlias": true
  },
  "callPickupGroup": "string",
  "groupDoNotDisturb": "string"
}

See POST /pm-extension-ms/pm-extension/v1/Analog/FAX for the request body parameters.

Click on Execute to generate the request URL.

Request URL:

https://<IP_Address>:<PORT>/pm-extension-ms/pm-extension/v1/Analog/FAX?subsystemName=asd

The following table lists the expected responses.

Response Type	Value	Schema
Valid Response	200 OK	See 200 OK: PUT /pm-extension-ms/pm-extension/v1/Analog/FAX
Error Response	400 Bad Request	Not applicable
	401 Authentication Failure	Not applicable
	403 Forbidden	Not applicable
	404 Not found	Not applicable