Direct Inward System Access
Initiation of Direct Inward System Access (DISA) Numbers
| Measure/Question | Observation/Comment | ||
|---|---|---|---|
|
1 |
Print all existing numbers with the command number_print. |
|
2 |
Does numbers to be initiated exist in the printout? |
||
3 |
Initiate one or more DISA numbers with the command number_initiate. |
-numbertype di |
|
4 |
Verify the result from the printout ordered by the command number_print. |
Erasure of Direct Inward System Access Numbers
| Measure/Question | Observation/Comment | ||
|---|---|---|---|
|
1 |
Print all existing numbers with the command number_print. |
|
2 |
Does the DISA number to be erased exist in the printout? |
||
3 |
Print all day and night service positions with the command RODNP. |
See the operational directions for ROUTE DATA. |
|
4 |
Erase those day or night service positions using the DISA number with the command RODNE. |
||
5 |
Erase the DISA number with the command number_end. |
||
6 |
Verify the result from the printout ordered by the command number_print. |
Alteration of Direct Inward System Access (DISA) Numbers
Verify existing (DISA) numbers with the command number_print.
Key the command number_end to erase the (DISA) numbers that is/are to be altered.
Key the command number_initiate to initiate the new (DISA) numbers (-numbertype di).
Verify the result from the printout ordered by the command number_print.