Execution

Configure Call Admission Control

General

The aim of the call admission procedure is to assure that the available bandwidth is not exceeded. The bandwidth per IP domain must be defined.

Note that the lowest common bandwidth for all involved IP domains will be used for IP calls between the IP domains.

Prerequisites

-

Execution

• Key the command ip_domain -p to check if the IP domain has already been initiated.

• If the domain has already been initiated, key the command ip_domain -c to change the bandwidth and possibly the codec priority-ordered list for the IP calls. If not, take the next command.

• Key the command ip_domain -i to initiate a network domain name with the included LAN segments and the supported bandwidth for outgoing IP calls.

• Key the command ip_domain -p to verify that the IP domain has been properly defined.

Iterate step 1 to step 4 for all the cooperating IP domains.