Route and Trunk

Initiating SIP Route

General

A direct route (mobile direct access) between the PLMN and the PBX offers possibilities for the public terminal (remote extension) to request PBX services in the same way as for other generic extensions.

Execution

  1. Initiate the SIP route, see the command description for sip_route.

  2. Initiate the route parameters. Use the command ROCAI, followed by the command RODAI.

  3. Enter the commands ROCAP and RODAP to verify the result.

  4. Enter the command ROEQI to finalize the route initiation.

  5. In ROEQI specify the same LIM number (X in TRU=X-1) as used when initiating the directory number in command extension -i --lim. Calls for remote extensions will always be sent from the LIM set in command extension. TRUs may also be set for other LIMs.

For reference, see the operational directions for ROUTE DATA, RO.

Removing a Route or Trunk

  1. Remove the trunk lines by entering the command ROEQE.

  2. Remove the route by entering the command sip_route -remove.

For reference, see the operational directions for ROUTE DATA, RO.
Parent topic: Procedures
↑