IP1

First IP address for PNR Destination

Format

Function

The parameter states an IP address in IPv4 format for a network interface. This parameter is only used in the PNR table for Private Network Routing.

Certain IP addresses that are reserved or have a special meaning (for example for this network, this system, broadcast, and loop-back) are not allowed. For example, the following IP addresses must not be used in certain networks: 0, 127, 128, 191, 192, 223.

See en.wikipedia.org/wiki/IPv4#Addressing or RFCs for details on IPv4 addresses.

Note: Always consult your network administrator for available IP addresses.

Note: If parameters IP1 and IP2 are used simultaneously, they should be connected to the same route on the receiving switch.

Note: IP address 255.255.255.254 means that there is no IP configuration data for this ENTRY. Order to the satellite to use alternative route.

Example

• The IP address of the network interface at the external destination shall be 129.2.7.9.

  IP1 = 129.2.7.9