VARO - TL65
Signaling diagram for outgoing traffic
Format
VARO = D1D2D3D4D5D6D7D8 |
||
D1D2D3D4 = |
0000 |
Reserved |
D5 = |
0 - 1 |
See Table Table 1. |
D6 = |
0 - 4 |
See Table Table 2. |
D7 = |
0 - 3 |
See Table Table 3. |
D8 = |
0 - 1 |
See Table Table 4. |
0 |
1 |
|
Support of End to End DTMF signaling for outgoing calls from SIP extensions |
||
No |
X |
. |
Yes |
. |
X |
Note: If D5 is set to 0, the key * pressed from a SIP extension in speech, is considered as an inquiry.
If D5 is set to 1, the key * pressed from a SIP extension in speech, is considered as a DTMF digit.
0 |
1 |
2 |
3 |
4 |
|
T303 timer length |
|||||
time in seconds |
4 |
1 |
2 |
3 |
4 |
Note: 0 is the default value.
0 |
1 |
2 |
3 |
|
Request Advice Of Charge (AOC) at call setup and Type of Charging |
||||
No AOC request |
X |
. |
. |
. |
Continuous charging during the call (AOC-D ISO/ETSI) |
. |
X |
. |
. |
Charging at end of call (AOC-E ISO/ETSI) |
. |
. |
X |
. |
Both AOC-D and AOC-E (ISO/ETSI) |
. |
. |
. |
X |
Note: In the case of H.323 public trunks, AOC request must be set to NO.
0 |
1 |
|
Type of external line |
||
Tie line |
X |
. |
Public external line |
. |
X |
Function
The parameter indicates the signal diagram variations for outgoing traffic.
Example
- The type of route is continuous charging during the call tie line and is requested. T303 timer is 2 seconds.
VARO= 00000200
Support of End to End DTMF signaling for outgoing calls from SIP extensions
No
T303 timer length
2 seconds
Keycode sender level
Normal
Request Advice Of Charge (AOC) at call setup and Type of Charging
No AOC request
Type of external line
Tie line