block_list
List blocked or disturbance marked devices
Format
- block_list
- [-lim]
Function
List blocked and disturbance marked devices in the system.
Note: This command will be deprecated and will be removed in future release. So, refer to the new blocking command in the section.
Parameters
- -lim
LIM number [range: 1-124].
Example: 3 (single value) all (all lims) 1...4 (series) 1,5,8 (multiple values) 1,3...5,7 (combination)
- PRINTOUT
Equ Boardid Blocking Distmark Linelock .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- Equ
Equipment position
- Boardid
Interface identity for boards.
Values: integer, with the range 1 - 127.
The switch requires an argument. The argument is single-valued.
See the parameter BRDID in TECHNICAL REFERENCE GUIDE. MML PARAMETER DESCRIPTION for details.
- Blocking Blocking variable This value embraces 16 position. Each position where a digit 1 is placed indicates a fault marking or blocking. The positions are named b0-b15. b0 is the right most bit in the printout.
b00
Manual blocking of individual on the device board
b01
Internal blocking during handling of exchange data
b02
Faulty device board
b03
Faulty device or line fault
b04
Fault in equipment connected to a device board
b05
Blocked by equipment outside the system
b06
Device program in start phase
b07
Manual blocking of device board via command
b08
Manual blocking of busy individual has been initiated
b09
Manual blocking of device board has been initiated
b10
Blocking caused by external equipment
b11–15
Vacant
- Distmark Disturbance marked
no
Not disturbance marked
yes
Disturbance marked and will be only used as last choice
- Linelock Line blocked
yes
Device individual is blocked due to line error
no
No fault found on line
Examples
- List blockings in LIM 3.
block_list -lim 3
- List all blockings in system.block_list
block_list
Faulty devices
Equ
Boardid
Blocking
Distmark
Linelock
001a-0-70-0
87
B'0000000010000001
no
no
001a-0-70-1
87
B'0000000010000001
no
no
001a-0-70-2
87
B'0000000010000001
no
no
001a-0-70-3
87
B'0000000010000001
no
no