Web Interface

To configure and manage the MGU3 board using the Web Interface:

  1. Connect the MGU3 board to the network.

    • When the board connects to the network for the first time, it will attempt to obtain an IP address from a DHCP server.
    • If no IP address is assigned, the board will default to 192.168.1.2/24.
  2. Open a web browser and enter the following to access the Web Interface.
    http://<IP address>

  3. Login to the Web Interface using the following default credentials.

    • Username: admin
    • Password: admin

  4. After logging in for the first time, immediately change the default password to a preferred secure password (Mandatory on First Login).

  5. If required you can enable SSH remote access. (Optional)
    Note: For security reasons, SSH access is disabled by default.

Board Configuration Tasks

From the web interface, you can perform the following actions:
  • Change the Admin and Root Passwords
  • Configure the Board IP Address
  • Change the Board Host Name
  • Monitor Board Status
  • Take Trace/Logs for Troubleshooting
  • Enable/Disable SCTP over UDP
Parent topic: Functionality
↑