Initiate an Answering Position for Vacant Numbers

General

Answering position for vacant numbers is used when an incoming external call to a vacant number is to be rerouted to a common answering position. It is possible to define if B-answer signal shall be sent at rerouting due to call to a vacant number, see the command ASPAC, PARNUM=146.

Prerequisites

The route must be initiated and defined for direct in-dialling traffic. Depending on whether an extension or internal group hunting group number is to be an answering position for vacant numbers, these must already be initiated.

Execution

  1. Key the command ROVNI to initiate the answering position for vacant numbers.
  2. Key the command ROVNP to verify the result.
Parent topic: Answering Position for Vacant Numbers
↑