Addressing IP system phones manually

You want to address an IP system phone manually. You can address the phone statically or with the help of a DHCP and DNS server.

The table below shows how the relevant parameters need to be set for the different combinations of types of addressing.

Connect the IP system phone to the mains power and the IP network and wait for the phone to start up.
Open the local configuration menu by keeping the C-key pressed down.
Enter the phone address as well as the communication server address as follows:

Table 1. Enter the phone address.
Local configuration	Configuration via web browser	Static addressing	DHCP/DNS or DHCP only
DHCP	DHCP_ENABLED	off	on
IP address	IP_ADDRESS	Phone IP address (enter all 12 decimal places)	Automatically assigned values are displayed
Subnet Mask	SUBNET_MASK	Subnet mask	Automatically assigned values are displayed
GW address	GATEWAY	Gateway address	Automatically assigned values are displayed

Table 2. Enter the communication server address.
Local configuration	Configuration via web browser	Static addressing	DHCP/DNS	DHCP
PBX address	PBX_ADDRESS	Communication server IP address (enter all 12 decimal places)	The IP address retrieved from the DNS server is displayed.	Communication server IP address (enter all 12 decimal places)
DNS name	DNS_NAME	Communication server DNS name.	Automatically assigned values are displayed	Automatically assigned values are displayed
DNS server address	DNS_SERVER	0.0.0.0	Automatically assigned values are displayed	0.0.0.0