MMC Controller - General
Here you can define the interface to the AMC Controller.
Parameter |
Explanation |
ID |
Controller ID in the communication server’s configuration |
IP address |
IP address of the Controller |
MMC hostname |
|
MAC address |
|
Number of mobile phone digits to match |
|
User name |
|
Password |
|
Redirect server PIN |
Parameter |
Explanation |
DDI plan |
The following dialling-in numbers must be created in a direct dialling plan. Here you can specify in which plan you opened them. |
DDI |
Dialling-in number for the MMC-Clients. |
Callback |
The MMC client uses this dialling-in number to trigger a callback on the Controller. Once the MMC user has answered the callback, he can dial the call number of the call party he wants using DTMF. |
Call reverse |
If the call reverse feature is activated, incoming calls are signalled to the MMC client, but not offered. Instead the Controller takes the call. As soon as the MMC user wants to answer the call, the MMC client sets up a connection to the Controller and the Controller connects the two calls. |
SIM switch |
In the Controller several SIM cards with different call numbers may be registered for one and the same MMC client. After a change of SIM card the MMC user can then inform the Controller which of the cards is now active. |
IMS handover |
Parameter |
Explanation |
DDI |
|
Callback |
|
Call reverse |
|
SIM switch |
|
MTC number |
Enter as MTC number (MTC = Mobile Terminated Call), for instance, the main call number of the communication system. |
Parameter |
Explanation |
Disable inband DTMF detection |
|
Registration timeout interval(s) |
|
Listening SIP port |
|
Listening TLS port |
|
RTP start port |
|
RTP end port |
|
HTTP server port |
|
Route for outgoing calls |
|
Ignore CLIP of the caller |
Note:
This setting is only necessary if “Special Arrangement” (CLIP not screening) is not available at your network provider's. This is the case in Australia, for instance. |
See also....
The MTC number is sent to the mobile phone instead
of the caller CLIP. This makes the mobile phone to display the caller information
transmitted via the MMCC data channel to the mobile phone.