Post-Installation Configuration

After the successful servers installation, follow the steps in this section to conclude the configuration:
  1. Log off from the system as a root user (if root is used) and then login as mxone_admin user.
  2. Configure the media gateways. See Configure the Media Gateways for more information.
  3. Some optional features are not loaded by default. See Optional Programs for more information.

    To use one of those features, load the corresponding program unit(s) use the pu_add command. See the description for ADD/REMOVE/CHANGE PROGRAM for more details.

  4. Enter the board_config -scan command from the MX-ONE Service Node mdsh shell, see the command description for BOARD CONFIGURATION. This ensures that all virtual boards on the Media Gateway are registered by the MX-ONE Service Node.
  5. Enter the command alarm -p from the MX-ONE Service Node mdsh shell. This ensures that there are no serious alarms in the alarm log. Use alarm -? see the command description for ALARM FUNCTIONS.
  6. Optional Step: Network redundancy (bonding) configuration.

    Run the mxone_maintenance command (need elevated rights) that starts the Maintenance Utility and select option bonding from the menu.

  7. Optional Step: Server redundancy configuration.

    For details, see Operational directions for SERVER REDUNDANCY.

  8. Execute Installation Test for MX-ONE.

    For details see Operational Directions for Installation Test for MiVoice MX-ONE.

  9. Place a new order on the order desk to receive a permanent license file.

    For more details, see Operation Directions for ADMINISTRATOR USER'S GUIDE

Parent topic: Installation and Initial Configuration
↑