Domain 0 - MX-ONE Compatible Alarms
MX-ONE compatible alarms are explained in this section.
- Fault Code 0:10 - Control System Disturbance Counter at Top
- Fault Code 0:11 - Device Board in Wrong Position
- Fault Code 0:13 - No connection with Device Boards in One Magazine
- Fault Code 0:13 - No connection with Device Boards in Gateway
- Fault Code 0:14 - Activation of Device Board has Failed
- Fault Code 0:15 - Device Board Faulty or Missing
- Fault Code 0:29 - Alarm Log Almost Full
- Fault Code 0:30 - Incrementation Alarm for Alarm Severity 0
- Fault Code 0:31 - Incrementation Alarm for Alarm Severity 1
- Fault Code 0:32 - Incrementation Alarm for Alarm Severity 2
- Fault Code 0:33 - Incrementation Alarm for Alarm Severity 3
- Fault Code 0:34 - LIM Out of Order
- Fault Code 0:35 - Traffic Handling Common Function Out of Order
- Fault Code 0:36 - Fault Correcting Common Function Out of Order
- Fault Code 0:37 - Ordinary Common Function Out of Order
- Fault Code 0:40 - Exchange Data Reloaded
- Fault Code 0:42 - Restore of Exchange Data Has Failed
- Fault Code 0:43 - Program Unit Reloaded and Restarted
- Fault Code 0:44 - Reload of Program Code Has Failed
- Fault Code 0:45 - LIM Reloaded and Restarted
- Fault Code 0:49 - Restart of Program Unit has Failed
- Fault Code 0:50 - Restart of LIM Has Failed
- Fault Code 0:51 - Device Board Individual Manually Blocked
- Fault Code 0:52 - Device Board Manually Blocked
- Fault Code 0:53 - Device Board Position Already Occupied
- Fault Code 0:54 - Program Unit Restarted
- Fault Code 0:56 - The System Does not Have an Accessible Backup
- Fault Code 0:64 - Recovery Mode is Set to Manual
- Fault Code 0:65 - Synchronization Fault in LIM
- Fault Code 0:66 - Traffic Handling Common Function Faulty
- Fault Code 0:67 - Fault Correcting Common Function Faulty
- Fault Code 0:68 - Ordinary Common Function Faulty
- Fault Code 0:69 - Common Function is Loaded in Too Many LIMs
- Fault Code 0:73 - LIM Restarted
- Fault Code 0:81 - LIM Manually Blocked
- Fault Code 0:93 - Backup of Exchange Data Has Failed
- Fault Code 0:270 - Digital trunk, bit error in frame synchronization word
- Fault Code 0:118 - License Server Out Of Order: Internal Error or Inconsistency
- Fault Code 0:120 - Less Than Seven Days of Trial Period Left
- Fault Code 0:121 - License Server Blocked: Over License Limit
- Fault Code 0:122 - License Counters Out Of Synchronization
- Fault Code 0:259 - Faulty FTU Board
- Fault Code 0:260 - Fault on Line to Interworking PBX or Public Exchange
- Fault Code 0:261 - No Connection with Operator Console
- Fault Code 0:264 - Faulty MF Sender
- Fault Code 0:265 - Faulty MF Receiver
- Fault Code 0:268 - Digital Trunk Out of Order, AIS Signal Received
- Fault Code 0:269 - Digital trunk, Loss of Frame Synchronization Word
- Fault Code 0:271 - Digital Trunk, Received Alarm from Remote End
- Fault Code 0:274 - Digital Trunk, Clock Malfunction (Slip)
- Fault Code 0:275 - Statistic Supervision, Too Short Seizure of Trunk
- Fault Code 0:276 - No Connection with Paging Equipment
- Fault Code 0:277 - Supervision value exceeded for paging equipment
- Fault Code 0:280 - Digital Trunk, Unauthorized Charging Pulse
- Fault Code 0:281 - Quality Error in Interface to ICS Computer
- Fault Code 0:282 - Status Error in Interface to ICS Computer
- Fault Code 0:283 - Congestion Value for Keycode Receiver Reached
- Fault Code 0:284 - Congestion Value for Tone Receiver Reached
- Fault Code 0:285 - Congestion Value for CS (MFC) Reached
- Fault Code 0:286 - Congestion Value for CR (MFC) Reached
- Fault Code 0:288 - Congestion Value for Conference Reached
- Fault Code 0:289 - Congestion Value for Common Bell Reached
- Fault Code 0:290 - Congestion Value for Route Reached
- Fault Code 0:292 - Traffic Recording Data Dump Could Not Be Executed
- Fault Code 0:293 - Traffic Recording Internal Memory Data Erased, Memory Full
- Fault Code 0:294 - Traffic Recording Internal Memory Data Erased, Midnight Dump
- Fault Code 0:295 - Calendar Time Activation Request Denied
- Fault Code 0:296 - Congestion Value for Keycode Sender Reached
- Fault Code 0:297 - Loss of Power (-60 V)
- Fault Code 0:298 - Character error in the interface to information computer system
- Fault Code 0:299 - Digital Trunk, Wrong Pattern Received in Idle State
- Fault Code 0:300 - Digital Trunk, Seizure Acknowledgment not Received
- Fault Code 0:301 - Digital Trunk, Wrong Bit Pattern Received After Disconnection
- Fault Code 0:302- Digital Trunk, Wrong Bit Pattern Received In Registration State
- Fault Code 0:303- ISDN Data Link Alarm
- Fault Code 0:305 - Blocked Trunk Line by a Manual Switch on the Board
- Fault Code 0:306 - Incoming Call, the Line Pulses are not in Range
- Fault Code 0:307 - Outgoing call, the Line Pulses are not in Range
- Fault Code 0:308 - Analogue Trunk, Unauthorized Charging Pulse
- Fault Code 0:309 - ISDN Data link Alarm, Bit Error in Stream (CRC-4)
- Fault Code 0:310 - ISDN Excessive Bipolar Violation
- Fault Code 0:311- ISDN Failed Signal State
- Fault Code 0:312 - ISDN Digital Trunk, Loss of Signal
- Fault Code 0:313 - ISDN Excessive Out of Frame
- Fault Code 0:314 - ISDN Bit Error Rate
- Fault Code 0:317 - ISDN Erred Seconds
- Fault Code 0:319 - Static semipermanent connection disturbance
- Fault Code 0:320 - Telephony Calls Throttled
- Fault Code 0:321 - IP Address Blocked
- Fault Code 0:324 - Faulty TMU Board
- Fault Code 0:330 - No Signaling Link Active Within Signaling Link Set (SS7)
- Fault Code 0:332 - Excessive Delay of Acknowledgement Message
- Fault Code 0:333 - Digital Trunk Group, Excessive Number of Blocked Lines
- Fault Code 0:334 - Digital Transmission System Faulty
- Fault Code 0:336 - Lost Data from/to Information Computer System
- Fault Code 0:337 - Digital Trunk, Call Setup Message Received for Unassigned Circuit
- Fault Code 0:339 - Quality Error in ANCD Communication
- Fault Code 0:345 - Information Computer, Faulty Communication Channel
- Fault Code 0:346 - Information computer output buffer overflow
- Fault Code 0:347 - Synchronization Fault for DECT Fixed Part
- Fault Code 0:348 - Synchronization Disturbance for DECT Fixed Part
- Fault Code 0:349 - Faulty RFP for DECT Fixed Part
- Fault Code 0:350 - CSTA, Faulty Communication Channel
- Fault Code 0:358 - SMS, Faulty Communication Channel
- Fault Code 0:359 - Routing Server, Faulty IP Connection to Satellite
- Fault Code 0:360 - Routing Server, PNR Table Has Been Split
- Fault Code 0:362 - Device Board is at Alarm Level 2
- Fault Code 0:365 - Device Fault
- Fault Code 0:366 - Inconsistency Between Defined ITYPE and Active Terminal
Parent topic: Fault Codes — Fault Handling
↑